APC EASY UPS 1000VA 230V BV1000I-MS – General Information:
Protection
Battery and surge-protected outlets
Back up and protect your hardware and data during power outages, surges, and spikes.
Battery backup and surge protection
Outlets provide abundant runtime for network gateway equipment and other critical low-power devices, allowing for hours of internet access during a power outage.
Safety
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Manageability
Audible alarms
Provides notification of changing utility power and UPS power conditions
LED Indicators
Provide easy-to-read status of the unit and utility power conditions.
Features
Transformer-block spaced outlets
Protect equipment with input transformer blocks without blocking access to other receptacles.
Cold-start capable
It provides temporary battery power when the utility power is out.
Boost Automatic Voltage Regulation (AVR)
Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.
Sleek design
Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor.
APC EASY UPS 1000VA 230V BV1000I-MS – Key Features:
- Output power capacity 600Watts / 1.0kVA
- Max Configurable Power (Watts) 600Watts / 1.0kVA
- Nominal Output Voltage 230V
- Output Frequency (not synced) 50/60 Hz /-1 Hz
- Topology Line Interactive
- Waveform type Stepped approximation to a sinewave
- Transfer Time 6ms typical 10ms maximum
- Nominal Input Voltage 230V
- Input frequency 50/60 Hz /- 5 Hz (auto sensing)
- Input Connections IEC-320 C14
- Battery type Maintenance-free sealed Lead-Acid battery with suspended electrolyte: leakproof
- Control panel LED status display with On Line: On Battery
- Audible Alarm Alarm when on battery: distinctive low battery alarm: overload continuous tone alarm
Reviews
There are no reviews yet.